Industria del reciclaje

Una gran cantidad de residuos puede utilizarse como materia prima para la generación de energía en el sentido de la economía circular. Los combustibles alternativos, como el CDR (combustible derivado de residuos) y los RSU (residuos sólidos triturados), están cobrando importancia. Ya se trate de un aumento del valor energético durante la producción de energía o de la mejora de la capacidad de control de las plantas de combustión, con nuestras secadoras de banda adaptadas de forma individual, en STELA siempre ofrecemos la solución perfecta.


Drying plants for the recycling industry

A great amount of waste can be utilised as a raw material for energy generation in the recycling economy. Alternative fuels (RDF (Refuse Derived Fuel) & SSW (Solid Shredded Waste)) more and more move into the focus of the recycling industry. Whether to increase the calorific value of energy generation or to improve the controllability of incineration plants, we at Stela always offer the perfect solution with our customised belt dryers.

Recycling management: Use of low-temperature dryers

The abbreviations RDF (Refuse Derived Fuel), SRF (Solid Recovered Fuel) and MSW (Municipal Solid Waste) stand for valuable refuse derived fuels (RDF), which were considered a problem for decades. Whether energy-rich waste from households or from the industry: STELA drying technology converts them into renewable resources for a sustainable energy economy.

The name alone makes it clear that the corresponding drying systems must deal with a very inhomogeneous and sometimes difficult-to-handle raw material. The raw material varies greatly from batch to batch, is neither regionally nor seasonally consistent and can change depending on the time of year.

A customised and efficient STELA drying system guarantees the following points:

The drying process makes the product more transportable and increases its calorific value. In addition, the storability is improved, and the weight loss reduces transport costs.

To achieve the desired improvements, the drying technology at RDF, SRF and MSW is faced with the challenge of reacting individually to the sometimes strongly fluctuating moisture content.

 

Drying plants from STELA Laxhuber

Drying systems from STELA are not only robust, they are also designed to be quickly and flexibly customised to the respective requirements. Automatic final moisture control and efficient ventilation ‘from above’ via frequency-controlled fans are just two key components of low-temperature belt drying, which has proven its worth in the recycling industry for decades.

The technology of the STELA dryer types in detail:

Environmentally conscious thinking, the careful use of resources and the forward-looking utilisation of new raw materials have always been important to STELA. As a climate-neutral company, we conduct research every day to achieve even better results through efficient drying. One focus is on recycling, which can make us less dependent on fossil fuels.


Do you have any further questions? The STELA sales team will be pleased to help you.

STELA Produktserien

Get in contact

our references

Belt dryer for sawdust
in Latvia

Dryer type: BT 1-6200-30
Rendimiento de la secadora:
sawdust: 8.5 t/h from 50% to 10%

Belt dryer for sawdust
in Estonia

Dryer type: BT 1-6200-30
Rendimiento de la secadora:
sawdust: 8.5 t/h from 50% to 10%

Belt dryer for sawdust
in Canada

Dryer type: BT 1-6200-42
Rendimiento de la secadora:
sawdust: 14.8 t/h from 50% to 6%

Belt dryer for SRF
in Great Britain

Dryer type: BTL 1-3000-22
Rendimiento de la secadora:
SRF: 36 t/h from 20% to 10%

Belt dryer for sawdust
in Argentina

Dryer type: BT 1-6200-9
Rendimiento de la secadora:
sawdust: 2.95 t/h from 50% to 11%

Belt dryer for sawdust
in Italy

Dryer type: BT 1-6200-19.5
Rendimiento de la secadora:
sawdust: 6 t/h from 50% to 10%

Belt dryer for sawdust
in Belgium

Dryer type: BT 1-6200-25.5
Rendimiento de la secadora:
sawdust: 10 t/h from 50% to 9%

Belt dryer for wood chips
in Germany

Dryer type: BT 1-6200-13.5
Rendimiento de la secadora:
wood chips: 3.9 t/h from 50% to 25%

Belt dryer for sawdust
in Norway

Dryer type: BT 1-6200-13.5
Rendimiento de la secadora:
sawdust: 3.7 t/h from 57% to 10%

A las referencias

Persona de contacto

Baja temperatura, secadora continua, secadora de circulación: ¿no está seguro de cuál es la mejor opción para usted? Nuestros experimentados colegas estarán encantados de ayudarle a encontrar la mejor solución para su producto. No dude en ponerse en contacto con nosotros, sin compromiso.

Teléfono +49 8724 899-10
Correo electrónico sales[at]stela.de