BT 1-6200-30
in Latvia
Produkt: Sawdust
Wydajność suszarki:
Sawdust: 8.5 t/h from 50% to 10%
Przemysł recyklingowy
Dużą ilość odpadów można wykorzystać jako materiał wyjściowy do wytwarzania energii w rozumieniu gospodarki o obiegu zamkniętym. W centrum uwagi znajdują się paliwa alternatywne, takie jak RDF (Refuse Derived Fuel) i SSW (Solid Shreddred Waste). Niezależnie od tego, czy zachodzi potrzeba zwiększenia wartości opałowej przy wytwarzaniu energii czy też poprawy możliwości regulacji działania instalacji spalania, w STELA oferujemy zawsze idealne rozwiązanie, dostosowując nasze suszarnie taśmowe do indywidualnych potrzeb klienta.
Drying plants for the recycling industry
A great amount of waste can be utilised as a raw material for energy generation in the recycling economy. Alternative fuels (RDF (Refuse Derived Fuel) & SSW (Solid Shredded Waste)) more and more move into the focus of the recycling industry. Whether to increase the calorific value of energy generation or to improve the controllability of incineration plants, we at STELA always offer the perfect solution with our customised belt dryers.
Recycling management: Use of low-temperature dryers
The abbreviations RDF (Refuse Derived Fuel), SRF (Solid Recovered Fuel) and MSW (Municipal Solid Waste) stand for valuable refuse derived fuels (RDF), which were considered a problem for decades. Whether energy-rich waste from households or from the industry: STELA drying technology converts them into renewable resources for a sustainable energy economy.
The name alone makes it clear that the corresponding drying systems must deal with a very inhomogeneous and sometimes difficult-to-handle raw material. The raw material varies greatly from batch to batch, is neither regionally nor seasonally consistent and can change depending on the time of year.
A customised and efficient STELA drying system guarantees the following points:
- Highest product quality
- Safe process control
- Gentle dehumidification
- Improved storability
- Reduction of transport costs
The drying process makes the product more transportable and increases its calorific value. In addition, the storability is improved, and the weight loss reduces transport costs.
To achieve the desired improvements, the drying technology at RDF, SRF and MSW is faced with the challenge of reacting individually to the sometimes strongly fluctuating moisture content.
Drying plants from STELA Laxhuber
Drying systems from STELA are not only robust, they are also designed to be quickly and flexibly customised to the respective requirements. Automatic final moisture control and efficient ventilation ‘from above’ via frequency-controlled fans are just two key components of low-temperature belt drying, which has proven its worth in the recycling industry for decades.
The technology of the STELA dryer types in detail:
Environmentally conscious thinking, the careful use of resources and the forward-looking utilisation of new raw materials have always been important to STELA. As a climate-neutral company, we conduct research every day to achieve even better results through efficient drying. One focus is on recycling, which can make us less dependent on fossil fuels.
Do you have any further questions? The STELA sales team will be pleased to help you.
STELA Produktserien
Get in contact
our references
BT 1-6200-30
in Estonia
Produkt: Sawdust
Wydajność suszarki:
Sawdust: 8.5 t/h from 50% to 10%
BT 1-6200-42
in Canada
Produkt: Sawdust
Wydajność suszarki:
Sawdust: 14.8 t/h from 50% to 6%
BTL 1-3000-22
in Great Britain
Produkt: SRF
Wydajność suszarki:
SRF: 36 t/h from 20% to 10%
BT 1-6200-9
in Argentina
Produkt: Sawdust
Wydajność suszarki:
Sawdust: 2.95 t/h from 50% to 11%
BT 1-6200-19.5
in Italy
Produkt: Sawdust
Wydajność suszarki:
Sawdust: 6 t/h from 50% to 10%
BT 1-6200-25.5
in Belgium
Produkt: Sawdust
Wydajność suszarki:
Sawdust: 10 t/h from 50% to 9%
BT 1-6200-13.5
in Germany
Produkt: Wood chips
Wydajność suszarki:
Wood chips: 3.9 t/h from 50% to 25%
BT 1-6200-13.5
in Norway
Produkt: Sawdust
Wydajność suszarki:
Sawdust: 3.7 t/h from 57% to 10%
Partner do kontaktów
Niskotemperaturowe, suszarki przelotowe, suszarki obiegowe – nie wiesz, które rozwiązanie jest najlepsze dla Twojego produktu? Nasz zespół specjalistów z dużym doświadczeniem chętnie pomoże wspólnie znaleźć najlepsze rozwiązanie dla produktu klienta. Skontaktuj się z nami, aby uzyskać niezobowiązującą ofertę.
Telefon +49 8724 899-10
e-mail sales[at]stela.de
